Can I update the firmware on my Bypass module? Not all Fortin Bypass modules are updatable by Internet. If the Bypass module has a bar-code with a 12-character serial number on its sticker the preloaded firmware can be updated by Internet. Why should I update the firmware on my Bypass module? All Bypass modules are preloaded at the factory with the latest firmware available at the time of manufacture. Since that time we may have enhanced the firmware to include support for new vehicles, added fun...

 Read FAQ

This vehicle is equipped with an electronic ignition and traditional key barrel wiring from the remote-starter will not function. An electronic ignition vehicle does not have the normally associated Ignition, Accessory and Starter wires for the remote-starter to connect to and control. An INT series interface module will automatically control the electronic ignition based on the Ignition, Accessory and Starter input signals received from the remote-starter. Furthermore, the INT series interfac...

 Read FAQ

By default the Compustar, Arctic Start and NU-Start remote-start/alarm modules are not programmed out of the box to communicate with the Fortin 2-way data-link protocol. These modules must have a programming Group - Option (4-11) changed to Optional Setting 2 to communicate with Fortin bypass modules through the RS-232 2-way Data-Link plug. Option Programming using a 1-way Remote: 1) Hold down the LOCK + START buttons for 2.5 seconds, then release. The parking lights will flash once to con...

 Read FAQ