Products

INT-CHR2

Technical Support

INT-CHR2 troubleshooting guides and frequently asked questions.

Getting Started

Introductory information regarding our products and services. If you are new to Fortin products this is the place to get started.

8 Jan 2009 Getting Started - Firmware Update FAQ

Can I update the firmware on my Bypass module? Not all Fortin Bypass modules are updatable by Internet. If the Bypass module has a bar-code with a 12-character serial number on its sticker the preloaded firmware can be updated by Internet. Why should I update the firmware on my Bypass module? All Bypass modules are preloaded at the factory with the latest firmware available at the time of manufacture. Since that time we may have enhanced the firmware to include support for new vehicles, added fun...

[Rating: 5/10] Read FAQ

Products

Articles relating to the installation and programming of our products. These articles contain the latest information and cover special instances that are not covered in each of the products generic installation manuals.

5 Dec 2008 Why an INT series module is required for remote-starter installations with an electronic ignition.

This vehicle is equipped with an electronic ignition and traditional key barrel wiring from the remote-starter will not function. An electronic ignition vehicle does not have the normally associated Ignition, Accessory and Starter wires for the remote-starter to connect to and control. An INT series interface module will automatically control the electronic ignition based on the Ignition, Accessory and Starter input signals received from the remote-starter. Furthermore, the INT series interfac...

[Rating: 4/10] Read FAQ

8 Dec 2008 Why theft protection is mandatory for the new Dodge, Chrysler and Jeep vehicles.

Theft protection is necessary when installing an after-market remote-starter in to a Chrysler, Dodge or Jeep vehicle with the new style electronic ignition barrel. If the interface module does not offer any theft protection the vehicle can be driven away by simply inserting any object in the key cylinder. The following video demonstrates how a vehicles remote-starter can be taken over with just a finger and the vehicle can be driven away when using an interface module without theft-protection:...

[Rating: 10/10] Read FAQ

23 Jan 2009 Fortin 2-way Data-Link with Compustar 5000 and 5200 series starters and alarms.

By default the Compustar, Arctic Start and NU-Start remote-start/alarm modules are not programmed out of the box to communicate with the Fortin 2-way data-link protocol. These modules must have a programming Group - Option (4-11) changed to Optional Setting 2 to communicate with Fortin bypass modules through the RS-232 2-way Data-Link plug. Option Programming using a 1-way Remote: 1) Hold down the LOCK + START buttons for 2.5 seconds, then release. The parking lights will flash once to con...

[Rating: 9/10] Read FAQ