ENGLISHFRANCAIS

Buick LeSabre 2000

View the vehicle below.
BUICK
LESABRE
2000

Buick LeSabre 2000

 sedan
PRODUCTS
FILES
PROGRAMMING
WIRING

Key Programming

How to program new and spare keys to the vehicles passive anti-theft system.

Programming a new key (no other working keys are available):

All previously programmed keys will be erased. To stop the process at any time, simply remove the key and use an existing key to start the car.

  1. Put the newly cut Master key into the key cylinder and turn the ignition to the ON (RUN) position. A security indicator light on the dashboard will stay on for 10 minutes.

  2. Within 1 minute after the indicator light goes off, turn the ignition to OFF, then return the ignition to the ON (RUN) position. The indicator light again will stay on for 10 minutes (Do not remove the key).

  3. Again, within 1 minute after the indicator light goes off, turn the ignition to OFF, then return the ignition to the ON (RUN) position. The indicator light again will stay on for 10 minutes (Do not remove the key).

  4. When the indicator light goes off the third time, the new key is programmed into the computer and will now start the vehicle. Remove the key and then re-insert it into the ignition and start the vehicle.



Programmming a spare key:

To stop the process at any time, simply remove the key and use an existing key to start the car.

  1. Place an already programmed key in the key cylinder

  2. Cycle the ignition from OFF to ON (RUN) to OFF.

  3. Within 15 seconds, insert the new key in the ignition. Turn the ignition to the ON (RUN) or START position. The "security" indicator light will go on and then off. Turn the ignition "OFF".

  4. The new key will now start the vehicle.

  5. Repeat the second step for each new key to be programmed.
Copyright © 2004, 2005, 2006, 2007, 2008, 2009, 2010 FORTIN AUTO RADIO INC - ALL RIGHTS RESERVED
[Javascript Required]